How to Clean Your Computer With a Brush?

When was the last time you cleaned your PC? Do you remember? If you don't, it is time to clean it. Dust and dirt accumulate inside and outside your Computer, which leads to various issues like overheating, hardware damage and even system failure. Cleaning your PC is an integral part of computer maintenance that should be addressed. In this post, we will be discussing how to clean a PC with a brush - according to the experts who offer computer repairs in Melbourne and other places.

Clean a PC Using a Brush - Step-by-step Guide

Before you begin, be sure to turn off your PC and unplug it from power. Also, prepare the following materials: soft bristle brush, microfiber cloth, compressed air can, isopropyl alcohol, and cotton swabs.

Cleaning the Surface of Your Computer

According to the professional who offers computer repairs in St Kilda and other locations, when you clean your Computer, the first thing you need to clean is the surface. This includes a monitor, keyboard, mouse and computer case.

• Use a soft bristle brush to remove dust and dirt from your monitor, keyboard and mouse. Brush gently so as not to damage the surface.
• For a computer case, use compressed air to blow away dust from the case. Keep the can upright and spray short bursts of air into the vents, ports and fans of the case. Keep the fan blade in place so that the fan blade does not rotate and generate a bal current that can damage the fan.
• Wipe the outer surface with a microfiber cloth slightly moistened with isopropyl alcohol. This removes all remaining dirt and disinfects the surface.

Cleaning the Interior of the PC

According to the specialist who offers computer repairs in Melbourne and other regions, using a brush to clean your PC’s interiors includes the motherboard, CPU, graphics card and other components.

• Depending on the design of the case, remove the side panel or top cover to open the computer case. Refer to the manufacturer’s manual for instructions.
• Use a soft bristle brush to remove any remaining dust and dirt from the components. Brush gently to prevent component damage or cable shedding.
• Clean the edges and corners of the components using a cotton swab slightly moistured with isopropyl alcohol. This removes stubborn stains and disinfects the surface.
• Use a vacuum cleaner with a brush attachment to suck loose dirt and dust from the bottom and corners of the case.

If everything sounds good-looking, congratulations! You have cleaned your Computer successfully using a brush.